ABS 레인 게이지
The Veswe ABS Plastic Tipping Bucket Rain Gauge is specifically designed for weather station use, serving as a highly cost-effective commercial alternative to standard stainless steel models. It operates on the identical tipping bucket principle, delivering reliable precipitation data at a budget-friendly price point.
While its accuracy and lifespan are slightly reduced compared to metal gauges due to material differences, it is the ideal choice for beginners or projects with limited budgets. This affordable plastic rain gauge offers the perfect balance of functionality and value for entry-level environmental monitoring.
- Model: VRS-YL&-&-2-EX
- MOQ: 1 PCS
- 배송 날짜: 24시간 이내
- 지금 가격 문의
문의: 이메일: contact@veswe.com | WhatsApp: +8613418148929
베스웨 강우량 게이지 유형
다음은 다양한 사용자 요구에 따라 당사가 생산 및 판매하는 모든 종류의 강우량계입니다. 관심 있는 제품 모델에 대한 메시지를 남겨 주시면 설명서를 제공해 드리겠습니다. ABS 티핑 버킷 강우량계가 가장 저렴합니다.
VRS-YL&-&-2-EX
팁 버킷 재질: ABS 플라스틱
정확도: ±0.32mm
해상도: 0.2mm/0.5mm
높이: 255mm
비를 견디는 입구 소재: ABS 플라스틱
출력: RS485/0-5V/0-10V/0-2V/4-20mA/Pulse
가격: 가격문의하기
VS-YL&-&-4-EX
팁 버킷 재질: ABS 플라스틱
정확도: ≤±3%
해상도: 0.2mm/0.5mm
높이: 435mm
비를 견디는 입구 소재: ABS 플라스틱
출력: RS485/0-5V/0~2V/0-10V/4-20mA/Pulse
가격: 가격문의하기
VRS-YL-&-5-EX
팁 버킷 재질: 스테인리스 스틸
정확도: ≤±4%
해상도: 0.1mm/0.2mm/ 0.5mm
높이: 365mm
비를 견디는 입구 소재: 304 스테인리스 스틸
출력: RS485/0~2V/0-5V/0-10V/4-20mA/Pulse
가격: 가격문의하기
VR-YL&-&-6S-EX
이중 팁 버킷 소재: ABS 플라스틱
정확도: ≤±3%
해상도: 0.1mm/0.2mm/0.5mm
높이: 435mm
비를 견디는 입구 소재: 304 스테인리스 스틸
출력: RS485/0~2V/0-5V/0-10V/4-20mA/Pulse
가격: 가격문의하기
VR-YL&-&-6SP-EX
더블 팁 버킷 재질: 스테인리스 스틸
정확도: ≤±3%
해상도: 0.1mm/0.2mm/0.5mm
높이: 435mm
비를 견디는 입구 소재: 304 스테인리스 스틸
출력: RS485/0~2V/0-5V/0-10V/4-20mA/Pulse
가격: 가격문의하기
VR-FYL&-&-1-EX
비 감지 직경: 6cm
해상도: 표준 0.1mm
일반적인 정확도: ±4%¹
최대 순간 강우량: 24mm/분
전원 공급 장치: 9~30V DC
출력 신호: RS485/펄스
가격: 가격문의하기
About - ABS Tipping Bucket Rain Gauge
The tipping bucket of our rain gauge is a three-dimensional streamlined design and is designed with a drooping curved diversion tip. Its appearance is beautiful and smooth, the water tipping performance is better, and it is easy to clean and maintain. The tipping bucket of our rain gauge is equipped with constant magnetic steel, and the reed switch bracket is equipped with a reed switch. When the equipment leaves the factory, the magnetic steel, and the reed switch have been adjusted at a suitable coupling distance so that the output signal of the instrument and the number of flipping buckets can be determined.
특징
Our tipping bucket rain gauge is composed of an integrated shell, filter, funnel, reverse flow dumper, terminal block, leg bracket, reed switch, control box, rain gauge base, etc. Among them, a tipping bucket shaft, around the horizontal bubble, a dry reed switch bracket, and a signal output terminal are installed on the rain gauge base. Unlike other tipping bucket rain gauges, the tipping bucket sleeve of our rain gauge is an integrated positioning structure, and the tipping bucket is installed in the shaft bearing through the tipping bucket shaft. The internal structure of our rain gauge has been assembled before leaving the factory, and there is no need for on-site installation of the internal structure, which brings convenience to on-site installation.
특징
| 전원 공급 장치 | DC 4.5-30V (RS485), DC 10-30V (Analog) |
|---|---|
| 최대 전력 소비량 | 0.24W |
| Cylinder diameter | Φ200mm |
| 해상도 | 0.2mm/0.5mm(옵션) |
| 최첨단 각도 | 40°-45° |
| 운영 환경 | 0~55°C, ＜95%(40°C에서) |
| 스토리지 환경 | -40°C~125°C, ＜80%(비응축) |
| 측정 오류 | ±0.32mm (indoor artificial precipitation, based on the instrument’s own water discharge) |
| Rainfall intensity range | 0mm~4mm/min |
| Max. permitted rainfall intensity | 8mm/min |
| 신호 출력 | RS485/4-20mA/0-2V/0-5V/0-10V/Pulse |
설치
Remove the ABS rain gauge from its packaging, read the instruction manual carefully, and verify that the instrument and all accessories are present. Inspect the exterior of the ABS rain collector for any damage, paying particular attention to the tipping-bucket assembly to ensure it is intact. Place the tipping bucket carefully to avoid damaging the tip of the bucket shaft or the curved water-guiding edges at either end of the bucket. Do not touch the inner surface of the tipping bucket with your fingers, as this may damage the bucket and compromise measurement accuracy.
Remove the EPE (pearl-cotton) foam block from the bottom of the instrument, then install the supplied retaining/support block to the instrument base.
When installing the outdoor ground and roof, first make the cement installation foundation according to the requirements, and the plane of the cement foundation should be horizontal. The size of the cement installation foundation is generally a 40cm×40cm square base with a height of not less than 30cm or a circular base with a diameter of 40cm. It is required that the height of the rain-bearing mouth of the instrument is 70cm from the ground level, and no shelters higher than the rain-bearing mouth of the instrument are allowed within 3 to 5 meters around the mouth of the instrument.
Install a fixed rain gauge to adjust the level of the rain opening Drill 3 mounting holes with a diameter of 10 cm and a depth of 8-10cm on the cement foundation, place the expansion bolts in the mounting holes, and lock them with lock nuts, and then install the instrument base on the 3 height-adjusting support nuts, and adjust the support nuts Use a level to measure whether the ring mouth is in a horizontal state, and finally use the upper lock to fix the instrument. If you have special installation requirements, please contact our professional technicians.
장점
01. Easy use
Small size, easy installation, good stability. There is a level adjustment bubble inside the chassis, which can assist the bottom corner to adjust the equipment to the level.
02. Widely application
Our ABS tipping-bucket rain gauge can be used in meteorological stations, hydrological stations, and field observation sites to measure precipitation amount, rainfall intensity, and rainfall duration.
03. Good stability
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
04. High accuracy
Good linearity, long transmission distance, strong anti-interference ability. The rain-bearing mouth is made of ABS engineering plastic injection molding, with high smoothness and small errors caused by stagnant water.
05. Long using life
The shell of the plastic rain gauge is made of ABS engineering plastics, no rust, good appearance quality. Mesh holes are designed at the funnel to prevent leaves and other debris from blocking the rain flow down.
06. Free cloud platform
The measurement data can be uploaded in real time to our free cloud platform. Users can remotely access the data via a mobile app or computer software. The cloud platform also enables centralized management of multiple devices.
FAQs - ABS Tipping Bucket Rain Gauge
A rain gauge is a special device used to collect precipitation and to measure the amount of precipitation in millimeters. It is suitable for meteorological stations (stations), hydrological stations, environmental protection, flood control and drainage, as well as agriculture and forestry departments to measure precipitation.
The tipping bucket rain gauge receives rainwater through the rain-bearing mouth, and flows into the tipping bucket through the funnel mouth. When the accumulated water reaches a certain amount (such as 0.02mm), the tipping bucket loses its balance and turns over. The device sends a pulse or 485 signal, and the precipitation can be automatically calculated after accumulating the number of times.
First, the rain gauge needs to be disassembled, re-titrated to adjust the base point, and then the distance of the base point of the bucket turning over is adjusted. (This process requires professionals to operate).
Next, adjust the horizontal bubble inside the rain gauge, and use a small wrench to adjust the horizontal screw so that the horizontal bubble emerges in the center.
veswe stainless steel tipping bucket rain gauge accuracy is ≤3%, the double tipping bucket rain gauge accuracy is ≤2%, and the accuracy of the tipping bucket rain gauge we provide the highest precision is ≤1%.
- Rainfall
A tipping bucket rain gauge is a device that automatically measures accumulated rainfall. Its simple operation and accurate measurement make it the most widely used rain gauge.
The three main types of rain gauges are standard rain gauges, tipping bucket rain gauges, and gravimetric rain gauges. Although the basic operation of rain gauges is generally not that different from these major rain gauge types, it is possible to further differentiate how they work and how they provide data.
veswe is a manufacturer with 15 years of production and R&D experience. We offer you a wide range of quality rain gauges, ABS tipping bucket rain gauges, stainless steel tipping bucket rain gauges and optical rain gauges.
Measuring rainfall in a certain area can adjust agricultural production, analyze climate change, conduct hydrological research, etc.
Rain gauge basically collects water falling on it and records the change over time in the rainfall depth, which is usually expressed in mm.
In order to protect our patented technical parameters, please contact us for a manual.
Standard rain gauge: One of the easiest places to install a standard rain gauge is at the top of a fence post. Just make sure you choose an open area, level the gauge, and make sure the top of the gauge is higher than the top of the fence post.
Tipping bucket rain gauge: To use the tipping bucket rain gauge alone, you only need to place it on the open ground, ensure that it is level, and there is no obstruction above. When used with a weather station, it can be mounted on top of a weather stand pole.
인기 있는 날씨 센서
폴리카본 풍속 센서
폴리카본 풍향풍속 센서
초음파 풍속계
초음파 풍향풍속계
비 및 눈 센서
스테인리스 스틸 강우량 게이지
증발 센서
광학 강우량 게이지
소형 팁 버킷 강우량 센서
태양 복사 차폐
피라노미터 센서
PAR 센서
문의하기
우리 동료: Jack
전화/ 왓츠앱: +86 13418148929
이메일: contact@veswe.com
주소:1-4층, 269번 난다 하이웨이, 다시 거리, 판위, 광저우, 광동, 중국
English 
Arabic 
French 
German 
Hindi 
Italian 
Korean 
Portuguese 
Russian 
Spanish 
Thai 
Vietnamese 
Indonesian 
Malay 
Polish 
Turkish 
Swedish 
Japanese 
