Lora Toprak Nem Sensörü
The VRS-TR-LORAH-2-&-EX is a low power LoRa soil moisture sensor. It adopts our company’s unique LoRa wireless communication protocol to avoid mutual interference in the signal transmission process between multiple measuring points. This LoRa soil sensor has a transmission distance of up to 3000 meters and strong signal penetration. It can monitor the moisture and temperature in the soil at the same time. It is the best choice for remote monitoring.
- Model: VRS-TR-LORAH-2-&-EX
- ADEDI: 1 ADET
- Teslim tarihi: 24 saat içinde
- Şimdi Fiyat Sorgula
Sorularınız için: E-posta: contact@veswe.com | WhatsApp: +8613418148929
About - LoRa Soil Moisture Sensor
The veswe LoRa soil moisture sensor is a simple and inexpensive smart farming solution. It can simultaneously monitor soil temperature and moisture conditions. The monitoring data is wirelessly transmitted to the LoRa gateway through LoRa, and the LoRa gateway uploads the data of all measuring points to the cloud platform in a unified manner. Thereby easily creating a low-cost wireless remote monitoring network. Suitable for smart farm applications, irrigation, agriculture, etc.
Açıklama
This LoRa soil moisture sensor consists of a stainless steel soil probe and a data collector. When using, insert the probe of the soil sensor into the soil, and then the data collector collects the measured value and transmits it through LoRa. The data collector is powered by a replaceable lithium sub-battery with low power consumption. Long using life. The shell is made of waterproof ABS material, and the protection level is IP65, which can be used in the outdoor environment.
Özellikler
- The LoRa soil moisture sensor adopts LoRa spread-spectrum communication technology, featuring long transmission distance and strong anti-interference capability. The communication range can reach up to 3000 meters in line-of-sight conditions.
- The collector is equipped with a replaceable 3.6V li-Ion battery. It can monitor battery level, signal strength, and sensor data in real time, upload the information via LoRa wireless communication.
- With an IP65 protection rating, the collector is suitable for outdoor.
- The LoRa soil sensor offers high measurement accuracy, fast response speed, and good interchangeability. It is minimally affected by soil salinity, making it suitable for various soil types.
- The sensor is fully sealed, resistant to acid and alkali corrosion, and capable of long-term dynamic monitoring when buried in soil. The LORAH series supports extended transmission distance by adding LoRa intermediate repeaters.
Parametreler
| Güç kaynağı | DC 3.6V Li-Ion battery | |
|---|---|---|
| Pil ömrü | 3 years of continuous use with our company-provided battery, with data uploads every 5 minutes. | |
| Collector working temp | -20℃~+60℃ | |
| Collector output signal | LORA | |
| Transmission distance | Indoor | 3~4 walls |
| Outdoor | Sight distance 3000m | |
| Collector protection class | IP65 | |
| Çalışma ortamı | -40℃~80℃, 0%RH~95%RH (non-condensing) | |
| Soil Moisture | Menzil | 0-100%RH |
| Çözünürlük | 0.1%RH | |
| Doğruluk | ±2% within 0-50%, @ (brown soil, 30%, 25℃) ±3% within 50-100%, @ (brown soil, 60%, 25℃) | |
| Toprak sıcaklığı | Menzil | -40~80℃ |
| Çözünürlük | 0.1℃ | |
| Doğruluk | ±0.5°C (25°C) | |
| Sensor protection class | IP68 | |
| Prob malzemesi | Korozyon önleyici özel elektrot | |
| Line length | 2 meters (can be customized) | |
How to install LoRa soil moisture sensor?
Site selection
The collector should be placed as high as possible and in a relatively open place around it. It is recommended to be more than 1 meter above the ground. Do not place too many metal objects around the LoRa soil moisture sensor to prevent the wireless signal from being weakened. Electronic interference can originate from a variety of objects: generators, high-current equipment, high-voltage relays, transformers, etc. Vibration or shock can also be a source of interference, so the sensor should be installed as still as possible.
Do not install the LoRa soil moisture sensor in an environment beyond the measurement range, otherwise, the product will not work properly and the sensor will be permanently damaged. Please do not tear off the label on the product casing, which has important information such as the product’s ID.
Installation process
When installing the collector, first open the housing and insert the universal plug-in li-Ion battery (note: do not pull forcefully when opening the housing to avoid damaging internal wiring). The battery should be placed above the circuit board (note: if purchasing a battery separately, pay attention to the wiring of the connector). The indicator light will flash rapidly and then turn off once the process is complete. Reinstall the housing (ensure there are no visible gaps between the upper and lower casing to maintain waterproofing). Screw the antenna provided by our company onto the device.
For LORAH series products, users must first install the fuse holder into the designated interface. Once installed, the device will be powered on. Then, screw the antenna provided by our company onto the device
FAQs - LoRa Soil Moisture Sensor
A LoRa soil moisture sensor is a wireless device that measures soil water content and transmits data over a long range using LoRa (Long Range) communication technology. It is ideal for smart farming and remote irrigation monitoring.
Configuration via mobile phone NFC. Turn on the NFC function of the mobile phone, put the mobile phone against the surface of the collector, and configure it after the connection is completed.
- The steel probs must be fully inserted into the soil when measuring.
- Avoid strong sunlight directly on the sensor and cause the temperature to be too high. Pay attention to lightning protection when used in the field.
- Do not bend the steel needle violently, do not pull the sensor lead wire forcibly, and do not drop or violently hit the sensor.
- The sensor protection level is IP68, and the sensor can be immersed in water (the collector cannot be directly immersed in water).
- The sensor and the LoRa soil collector are connected by a plug-in cable. Please use the correct plug-in method when plugging.
Method 1: Select a suitable measurement location, avoid stones, ensure that the steel needle does not touch hard objects, discard the topsoil according to the required measurement depth, maintain the original tightness of the soil below, and firmly hold the sensor and insert it vertically The soil should not be shaken left and right when inserting. It is recommended to measure multiple times within a small range of a measuring point to obtain an average value.
Method 2: Dig a pit with a diameter > 20cm vertically, insert the sensor steel needle into the pit wall horizontally at a given depth, the collector cannot be buried in the soil, and the pit should be filled tightly and stabilized for a period of time. , measuring and recording for months or longer.
The LoRa soil moisture sensor can connect to our LoRa gateway via LoRa wireless communication, transmitting data to the platform. Users can view real-time or historical data on the platform and also access relevant information in real time through a computer or mobile phone.
- LoRa soil moisture sensor * 1
- Certificate of conformity, warranty card, etc.
- Expansion plugs * 2, self-tapping screws * 2 (LORAH device already installed in the housing)
- Plug-in li-Ion battery * 1 (LORAH device pre-installed inside the housing)
- Rod antenna * 1
Our LoRa gateways are available in four models: VRS-LGH-100-&-EX, VRS-LGH-200-&-EX, VRS-LGH-300-&-EX, and VRS-LGH-400-&-EX.
- The 100 series supports up to 32 LoRa wireless measurement nodes.
- The 200 series supports 32 LoRa wireless measurement nodes and 32 LoRa wireless controllers.
- The 300 series supports up to 128 LoRa wireless measurement nodes.
- The 400 series supports 64 LoRa wireless measurement nodes and 64 LoRa wireless controllers.
- Smart irrigation systems
Greenhouse automation
Orchard and vineyard management
Precision agriculture projects
Research and environmental monitoring
LoRa wireless transmission avoids wiring problems, and the transmission distance is long. The transmitted signal does not weaken with distance.
Please Bize ulaşın for the manual.
Popüler Toprak Sensörleri
Sektör Bilgisi
En İyi 3 Su Kalitesi Parametresi Türü | Veswe Su Kalitesi İzleme Sensörleri
Bize ulaşın
Meslektaşımız: Jack
Telefon / Whatsapp: +86 13418148929
E-posta: contact@veswe.com
Adres: Kat 1-4, No. 269 Nanda Otoyolu, Dashi Caddesi, Panyu, Guangzhou, Guangdongdong, Çin
English 
Arabic 
French 
German 
Hindi 
Italian 
Korean 
Portuguese 
Russian 
Spanish 
Thai 
Vietnamese 
Indonesian 
Malay 
Polish 
Turkish 
Swedish 
Japanese 
