Bouclier contre le rayonnement solaire
The Veswe Solar Radiation Shield is an essential accessory for professional weather stations. It effectively protects meteorological sensors from direct sunlight, rain, and dust, preventing measurement errors caused by solar heating or environmental exposure.
Featuring densely distributed ventilation openings, it ensures unobstructed airflow for reliable readings. This robust shield supports multi-sensor integration, including temperature & humidity, light, noise, barometric pressure, PM2.5/PM10, and CO₂ sensors, making it a compact solution for comprehensive environmental monitoring.
- Model: VRS-BYH-M-EX
- MOQ : 1 PCS
- Date de livraison : dans les 24 heures
- Demander le prix maintenant
Renseignements : Courriel : contact@veswe.com | WhatsApp : +8613418148929
About - Solar Radiation Shield
When used outdoors, this radiation shield protects built-in sensors from direct solar radiation and ground-reflected heat. Made of high-strength, UV-resistant materials, it ensures long-term performance even in rain, snow, strong winds, or harsh outdoor environments. Its low thermal conductivity effectively minimizes measurement errors caused by sunlight exposure, providing accurate and stable sensor readings in all weather conditions.
Caractéristiques
This outdoor solar radiation shield is a high-quality protective device designed to safeguard temperature, humidity, and barometric pressure sensors from solar radiation and precipitation, ensuring accurate and reliable measurements.
The unique structure allows air to circulate freely while effectively preventing the intrusion of dust, insects, rain, and snow. Users can flexibly integrate various internal sensors such as temperature, humidity, pressure, noise, light, CO₂, PM2.5, and PM10 sensors.
Featuring robust construction, high flexibility, low thermal conductivity, and strong UV resistance, this radiation shield is ideal for long-term use in harsh outdoor environments.
Fiches techniques
| DC power supply | 10-30VDC | |
| Maximum power consumption | RS485Output | 0.8W |
| Measure Range | Température | -40℃~+120℃ |
| Humidité | 0%RH~99%RH | |
| Illumination | 0~200000Lux | |
| Pression atmosphérique | 0-120Kpa | |
| Bruit | 30dB~130dB | |
| PM10 PM2.5 | 0-1000ug/m3 | |
| CO2 | 0-5000ppm | |
| Précision | Température | ±0.5℃(25℃) |
| Humidité | ±3%RH(60%RH,25℃) | |
| Illumination | ±7%(25℃) | |
| Pression atmosphérique | ±0.15kPa@25℃101kPa | |
| Bruit | ±0.5dB(at reference pitch, 94dB@1kHz) | |
| PM2.5 | ±3%FS(@0~100μg/m3, 25℃, 50%RH) | |
| CO2 | ±(50ppm+3%F·S) (25℃) | |
| Stabilité à long terme | Température | ≤0.1℃/y |
| Humidité | ≤1%/y | |
| Illumination | ≤5%/y | |
| Pression atmosphérique | -0.1kPa/y | |
| Bruit | ≤3dB/y | |
| PM10 PM2.5 | ≤1%/y | |
| CO2 | ≤1%/y | |
| Types of plates | 4, 6, 8, 12(other plates can be customized) | |
| Material | Special engineering plastics against radiation & Stainless steel screw | |
| Operating temperature | -40℃-+75℃ | |
Advanced technology
Air can flow freely through the shield to ensure that the sensor works normally with accurate data in a ventilated environment. The combination of panel geometry, sturdy materials, and natural ventilation can achieve effective shielding. It also supports the integration of various sensors. Even in direct sunlight, the Renke solar radiation shield can accurately measure the current ambient temperature.
Longue durée d'utilisation
The geometric design of our radiation shield can protect the sensor from all directions. The durable waterproof shell is made of high-quality anti-ultraviolet materials and has a long service life. The highly sensitive sensor provides stable signals and high accuracy. Different plates can be selected according to different places of use. There are 6~12 plates that can be chosen. Ease to installation.
Avantages
1. Improve measurement accuracy by shading and allowing air circulation.
2. High protection grade IP68, durable waterproof material, can be used normally in bad weather.
3. Good compatibility, multiple sensor modules can be stored inside, so a variety of meteorological parameters can be measured.
4. The integrated bracket and keyhole are easy to install and can be installed on flat and curved surfaces.
FAQs - Solar Radiation Shield
Our radiation shield can be equipped with a variety of sensors, including temperature and humidity sensors, barometric pressure sensors, light sensors, noise sensors, PM2.5 & PM10 sensors, or carbon dioxide (CO₂) gas sensors.
Note: The PM2.5 & PM10 sensor and the CO₂ sensor cannot be installed in the same radiation shield. If you need to monitor both parameters simultaneously, please purchase separate shields for each sensor type.
Brown wire: Power supply positive (+10~30VDC)
Black wire: Power supply negative (GND)
Yellow wire: RS485-A
Blue wire: RS485-B
To get more accurate readings, you can install the sensor at a height of 9 feet from the ground.
Our solar radiation shield is made out of ABS.
1. The solar radiation shield is installed on the weather station and can be directly fixed with expansion screws through the bracket.
2. The solar radiation shield is installed on a wall, pole, or other location, and can be installed by bending the plate.
For a single radiation shield, data can be uploaded to the user’s own software by connecting the device through veswe’s RS485-to-USB converter.
For multiple radiation shields, all units can be centrally connected to Renke’s environmental monitoring host, which collects, processes, and uploads the data to Renke’s free cloud platform for remote monitoring and management.
The radiation shield is widely used in various occasions that need to measure environmental temperature and humidity, noise, air quality, atmospheric pressure, and illumination. It is safe and reliable, beautiful in appearance, easy to install, and durable.
Smart Agriculture
Smart Cities
Smart Buildings
Weather Stations
Other Environmental
Monitoring Applications
Possible causes include:
1. Incorrect COM port selection on the computer.
2. Device address error or duplicate device addresses (default address is 1).
3. Incorrect baud rate, parity, data bit, or stop bit settings.
4. Polling interval and response time too short—set both to at least 200 ms.
5. RS485 bus disconnected or A/B wires reversed.
6. Too many devices or excessive wiring length—provide local power, add an RS485 repeater, and use 120Ω terminal resistors.
7. USB-to-RS485 driver not installed or corrupted.
8. The device itself is damaged.
Yes, the ventilation gap is small enough to allow only air to circulate and no insects are allowed to enter.
Capteurs météorologiques populaires
Capteur de vitesse du vent en polycarbone
Capteur de direction du vent en polycarbone
Anémomètre à ultrasons
Capteur de vent à ultrasons
Capteur de pluie et de neige
Pluviomètre en acier inoxydable
Capteur d'évaporation
Pluviomètre optique
Petit capteur de pluie à auget basculant
Bouclier contre le rayonnement solaire
Capteur pyranométrique
Capteur PAR
Connaissance du secteur
Les 3 principaux types de paramètres de qualité de l'eau | Capteurs de surveillance de la qualité de l'eau Veswe
Contactez nous
Notre collègue : Jack
Téléphone/ Whatsapp : +86 13418148929
Courriel : contact@veswe.com
Adresse : Floors 1-4, No. 269 Nanda Highway, Dashi Street ,Panyu , Guangzhou, Guangdongdong, China
English 
Arabic 
French 
German 
Hindi 
Italian 
Korean 
Portuguese 
Russian 
Spanish 
Thai 
Vietnamese 
Indonesian 
Malay 
Polish 
Turkish 
Swedish 
Japanese 
