बिक्री

सौर विकिरण ढाल

The Veswe Solar Radiation Shield is an essential accessory for professional weather stations. It effectively protects meteorological sensors from direct sunlight, rain, and dust, preventing measurement errors caused by solar heating or environmental exposure.

Featuring densely distributed ventilation openings, it ensures unobstructed airflow for reliable readings. This robust shield supports multi-sensor integration, including temperature & humidity, light, noise, barometric pressure, PM2.5/PM10, and CO₂ sensors, making it a compact solution for comprehensive environmental monitoring.

Model: VRS-BYH-M-EX
न्यूनतम ऑर्डर मात्रा: 1 पीस
डिलीवरी की तारीख: 24 घंटों के भीतर
कीमत के बारे में अभी पूछें

जांच-पड़ताल: ईमेल: contact@veswe.com | व्हाट्सएप: +8613418148929

उत्पाद सूची

तापमान सेंसर

तापमान डेटा लॉगर

पर्यावरणीय सेंसर

मौसम सेंसर

मृदा सेंसर

मौसम स्टेशन

गैस सेंसर

सुरक्षा सेंसर

जल उपचार सेंसर

स्तर और दबाव सेंसर

उपकरण

About - Solar Radiation Shield

When used outdoors, this radiation shield protects built-in sensors from direct solar radiation and ground-reflected heat. Made of high-strength, UV-resistant materials, it ensures long-term performance even in rain, snow, strong winds, or harsh outdoor environments. Its low thermal conductivity effectively minimizes measurement errors caused by sunlight exposure, providing accurate and stable sensor readings in all weather conditions.

विशेषताएँ

This outdoor solar radiation shield is a high-quality protective device designed to safeguard temperature, humidity, and barometric pressure sensors from solar radiation and precipitation, ensuring accurate and reliable measurements.

The unique structure allows air to circulate freely while effectively preventing the intrusion of dust, insects, rain, and snow. Users can flexibly integrate various internal sensors such as temperature, humidity, pressure, noise, light, CO₂, PM2.5, and PM10 sensors.

Featuring robust construction, high flexibility, low thermal conductivity, and strong UV resistance, this radiation shield is ideal for long-term use in harsh outdoor environments.

डेटाशीट्स

DC power supply	10-30VDC
अधिकतम विद्युत खपत	RS485Output	0.8W
Measure Range	तापमान	-40℃~+120℃
	आर्द्रता	01टीपी3टीआरएच~991टीपी3टीआरएच
	Illumination	0~200000लक्स
	वायुमंडलीय दाब	0-120Kpa
	शोर	30डीबी~130डीबी
	PM10 PM2.5	0-1000ug/m3
	सीओ2	0-5000पीपीएम
सटीकता	तापमान	±0.5℃(25℃)
	आर्द्रता	±3%RH(60%RH,25℃)
	Illumination	±7%(25℃)
	वायुमंडलीय दाब	±0.15kPa@25℃101kPa
	शोर	±0.5dB (संदर्भ पिच पर, 94dB@1kHz)
	PM2.5	±3%FS(@0~100μg/m3, 25℃, 50%RH)
	सीओ2	±(50ppm+3%F·S) (25℃)
दीर्घकालिक स्थिरता	तापमान	≤0.1℃/वर्ष
	आर्द्रता	≤1%/वर्ष
	Illumination	≤5%/y
	वायुमंडलीय दाब	-0.1kPa/वर्ष
	शोर	≤3dB/y
	PM10 PM2.5	≤1%/वर्ष
	सीओ2	≤1%/वर्ष
Types of plates	4, 6, 8, 12(other plates can be customized)
Material	Special engineering plastics against radiation & Stainless steel screw
संचालन तापमान	-40℃-+75℃

Advanced technology

Air can flow freely through the shield to ensure that the sensor works normally with accurate data in a ventilated environment. The combination of panel geometry, sturdy materials, and natural ventilation can achieve effective shielding. It also supports the integration of various sensors. Even in direct sunlight, the Renke solar radiation shield can accurately measure the current ambient temperature.

लंबी उपयोग अवधि

The geometric design of our radiation shield can protect the sensor from all directions. The durable waterproof shell is made of high-quality anti-ultraviolet materials and has a long service life. The highly sensitive sensor provides stable signals and high accuracy. Different plates can be selected according to different places of use. There are 6~12 plates that can be chosen. Ease to installation.

लाभ

1. Improve measurement accuracy by shading and allowing air circulation.
2. High protection grade IP68, durable waterproof material, can be used normally in bad weather.
3. Good compatibility, multiple sensor modules can be stored inside, so a variety of meteorological parameters can be measured.
4. The integrated bracket and keyhole are easy to install and can be installed on flat and curved surfaces.

FAQs - Solar Radiation Shield

Which sensors can be integrated into the radiation shield?

Our radiation shield can be equipped with a variety of sensors, including temperature and humidity sensors, barometric pressure sensors, light sensors, noise sensors, PM2.5 & PM10 sensors, or carbon dioxide (CO₂) gas sensors.
Note: The PM2.5 & PM10 sensor and the CO₂ sensor cannot be installed in the same radiation shield. If you need to monitor both parameters simultaneously, please purchase separate shields for each sensor type.

तार कैसे जोड़ें?

Brown wire: Power supply positive (+10~30VDC)
Black wire: Power supply negative (GND)
Yellow wire: RS485-A
नीली तार: RS485-B

Where to install solar radiation shield?

To get more accurate readings, you can install the sensor at a height of 9 feet from the ground.

What type of plastic material is the Acurite Radiation Shield made of? e.g ABS plastic? Styrene?

Our solar radiation shield is made out of ABS.

How to install a solar radiation shield?

1. The solar radiation shield is installed on the weather station and can be directly fixed with expansion screws through the bracket.
2. The solar radiation shield is installed on a wall, pole, or other location, and can be installed by bending the plate.

डेटा कैसे देखें?

For a single radiation shield, data can be uploaded to the user’s own software by connecting the device through veswe’s RS485-to-USB converter.
For multiple radiation shields, all units can be centrally connected to Renke’s environmental monitoring host, which collects, processes, and uploads the data to Renke’s free cloud platform for remote monitoring and management.

Where to use solar radiation shield?

The radiation shield is widely used in various occasions that need to measure environmental temperature and humidity, noise, air quality, atmospheric pressure, and illumination. It is safe and reliable, beautiful in appearance, easy to install, and durable.
Smart Agriculture
Smart Cities
Smart Buildings
Weather Stations
Other Environmental
Monitoring Applications

Why can’t the radiation shield connect to a PLC or computer?

Possible causes include:
1. Incorrect COM port selection on the computer.
2. Device address error or duplicate device addresses (default address is 1).
3. Incorrect baud rate, parity, data bit, or stop bit settings.
4. Polling interval and response time too short—set both to at least 200 ms.
5. RS485 bus disconnected or A/B wires reversed.
6. Too many devices or excessive wiring length—provide local power, add an RS485 repeater, and use 120Ω terminal resistors.
7. USB-to-RS485 driver not installed or corrupted.
8. The device itself is damaged.

Are the gaps thru the sides small enough to keep wasps from building nests?

Yes, the ventilation gap is small enough to allow only air to circulate and no insects are allowed to enter.

उद्योग ज्ञान

जल गुणवत्ता मापदंडों के शीर्ष 3 प्रकार | वेस्वे जल गुणवत्ता निगरानी सेंसर

जल गुणवत्ता पैरामीटर जलीय पर्यावरण की स्थिति और प्रवृत्तियों का आकलन करने के लिए उपयोग किए जाने वाले प्रमुख संकेतक हैं।.

हमसे संपर्क करें

हमारे सहकर्मी: जैक
फ़ोन/ व्हाट्सएप: +86 13418148929
ईमेल: contact@veswe.com
पता: तल 1–4, संख्या 269, नंदा हाईवे, दाशी स्ट्रीट, पान्यू, गुआंगझोउ, गुआंगडोंग, चीन

व्हाट्सएप: +86 13418148929 ; आधिकारिक ईमेल: contact@veswe.com

contact@veswe.com